L2 24 PORT NETWORK MANAGED SWITCH WITH 4G Upink SFP
Perfect Compact Switch For your commercial networking needs
Product Features
• IEEE 802.3at Compliance: Supports IEEE 802.3at standards, providing efficient power delivery to connected devices.
• 1GbE Downlink Ports: Equipped with multiple Gigabit downlink ports for high-speed network connectivity.
• 1GbE: Offers reliable Gigabit uplink ports for seamless data transmission to higher-level network infrastructures.
• 1GbE SFP Slots: Includes Gigabit SFP slots for flexible fiber optic connectivity options.
• Layer 2 Switching: Operates at Layer 2 of the OSI model, ensuring efficient data packet forwarding and network management.
• Web-Based Management: Features a web management interface for easy configuration and monitoring of network settings and performance.
• High Availability: Designed for high availability to minimize downtime and ensure continuous network operation.
• Scalability: Supports high scalability to accommodate growing network demands and expanding industrial setups.
The Comxus CX-NA-24GS4D-L2 is a high-performance Layer 2 Managed switch engineered to provide robust and scalable network solutions for demanding industrial environments. With its advanced features and durable design, this switch ensures optimal network performance and reliability.
| NETWORK PORT | 24×10/100/1000Mbps 1000Base-TX RJ45 Ports 4×1G SFP Ports 1x Console RJ45 Port | |
| RESET KEY | 1x Reset Key | |
| ENVIRONMENT DETECTION | 1 group of input detection of environment temperature and humidity | |
| PORT SPECIFICATION | 1-24 port 10/100/1000BaseT(X)auto detection | |
| TRANSMISSION MODE | Store and Forward (full wire speed) | |
| BANDWIDTH | 56G / 128Gbps | |
| PACKET FORWARDING | 41.67Mpps | |
| BUFFER | Fully integrated 4.1 Mbit packet buffer | |
| TRANSMISSION DISTANCE | 10BASE-T . Cat3,4,5 UTP(≤250 meter) 100BASE-TX . Cat5 or later UTP(150 meter) 1000BASE-TX . Cat6 or later UTP(150 meter) SFP: 1000M single and multimode optical With maximum distance ≤ 120km (depending on the optical module) | |
| FLASH | 128M | |
| RAM | 128M | |
| WATT | Standby power consumption Network full load power consumption≤25W Full load power consumption ≤240W | |
| LED INDICATOR | PWR:Power LED SYS:System LED 1-24:10/100.1000M Network connection indicator 25-26:SFP connection indicator | |
| POWER INPUT | Built-in power AC.100-240Vac 50-60Hz 0.3A max 25W | |
| OPERATING TEMPERATURE/HUMIDITY | -30° C +75° C; 5%~95% RH | |
| INGRESS PROTECTION | IP30 | |
| LIGHTNING PROTECTION LEVEL | 6KV | |
| WEIGHT | 2.1kg/2.8kg | |
| DIMENSION | 440mm*200mm*45mm 515mm*300mm*95mm | |
| PORT SHUTDOWN | Support | |
| Port Speed | Support auto negotiate, full-1000, full-100, half-100, full-10, half-10 | |
| Flow Control | support full-duplex IEEE 802.3x, half-duplex back pressure | |
| Storm Control | Supports rate limit for broadcast, multicast, and DLF packets | |
| Storm Constrain | Support the detection of broadcast packets, multicast packets, or unicast packets on the port, shutdown the port if the rate is over the threshold. | |
| Port Mirror | Support | |
| Port Rate Limit | Support port ingress and egress rate limit | |
| Link Aggregation | Support manual link aggregation Support LACP dynamic link aggregation Supports up to 8 aggregation groups, each group up to 8 ports Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy | |
| Port Isolate | Support | |
| Jumbo Frame | Support port-based VLAN Up to 4096 VLANs Support Voice VLAN, can configure QoS for voice data 802.1Q VLAN | |
| Cable Distance Diag | Support | |
| Redundant Port | Support | |
| The DDM of fiber ports | Support | |
| MAC | 8K | |
| MAC Table Management | Support | |
| Forwarding mode | Support IVL forwarding mode | |
| Static MAC Address | Support | |
| MAC Address Binding | Support | |
| MAC Address Filtering | Support | |
| MAC Learning Control | Control the MAC learning based on port | |
| Number of VLANs | 4K | |
| 802.1q-based VLAN | Support | |
| MAC-based VLAN | Support | |
| IP-based VLAN | Support | |
| Protocol-based VLAN | Support | |
| PVLAN | Support | |
| VLAN Mapping | Support 1:1 mapping | |
| QinQ | Support basic QinQ Support flexible QinQ | |
| Spanning Tree Protocol | Support STP/RSTP/MSTP | |
| Port Loop Detection | Support | |
| EAPS | Support RFC3619 | |
| ERPS | Support G.8032/Y.1344 | |
| LLDP | Support LLDP & LLDP-MED | |
| UDLD | Fully compatible with CISCO's UDLD protocol | |
| ARP | Support static and dynamic ARP | |
| IP Route | Support 0.0.0.0/0 route and other static route, but can’t support L3 forwarding. | |
| VLAN Interface | Support 32 VLAN interfaces | |
| Static Multicast MAC Address | Support | |
| IGMP SNOOPING | Support | |
| MLD SNOOPING | Support | |
| MVR | Support | |
| GMRP | Support | |
| Standard IP-based ACL | Support | |
| Extended IP based ACL | Support |
