Your Partner in Next-Gen Networking.
24 Port Managed Switch With 4 10G Uplink SFP
The Comxus CX-NA-24GS40S2-L2 is a high-performance Layer 2 Managed switch engineered to provide robust and scalable network solutions for demanding challenging environments. With its advanced features and durable design, this switch ensures optimal network performance and reliability.
Product Feature
• Layer 2 Switching: Provides efficient data forwarding with VLAN support, STP, and MAC address learning for optimized network segmentation and traffic management.
• High Port Density: Equipped with 24 Gigabit Ethernet ports, offering ample connectivity for various industrial devices and applications.
• 10G Uplink SFP Ports: Includes 2 10G SFP+ uplink ports, providing high-speed backbone connectivity and seamless integration with existing network infrastructure.
• Enhanced Security: Features comprehensive security protocols such as ACLs, 802.1x authentication, and
port security to protect against unauthorized access and ensure data integrity.
• Quality of Service (QoS): Advanced QoS mechanisms prioritize critical traffic, ensuring smooth and reliable performance for latency-sensitive applications.
• Redundancy and Reliability: Supports redundant power inputs and ring network topology, ensuring uninterrupted network operation and minimizing downtime.
• User-Friendly Management: Offers an intuitive web interface, SNMP support, and CLI for simplified configuration, monitoring, and maintenance.
The Comxus CX-NA-24GS40S2-L2 is a high-performance Layer 2 Managed switch engineered to provide robust and scalable network solutions for demanding challenging environments. With its advanced features and durable design, this switch ensures optimal network performance and reliability.
| NETWORK PORT | 24×10/100/1000Mbps 1000Base-TX RJ45 Ports 4×10G SFP Ports 1x Console RJ45 Port | |
| RESET KEY | 1x Reset Key | |
| ENVIRONMENT DETECTION | 1 group of input detection of environment temperature and humidity | |
| PORT SPECIFICATION | 1-24 port 10/100/1000BaseT(X)auto detection | |
| TRANSMISSION MODE | Store and Forward (full wire speed) | |
| BANDWIDTH | 512Gbps | |
| PACKET FORWARDING | 95.23Mpps | |
| BUFFER | 12M | |
| TRANSMISSION DISTANCE | 10BASE-T . Cat3,4,5 UTP(≤250 meter) 100BASE-TX . Cat5 or later UTP(150 meter) 1000BASE-TX . Cat6 or later UTP(150 meter) SFP: 1000M single and multimode optical With maximum distance ≤ 120km (depending on the optical module) | |
| FLASH | 512M | |
| RAM | 512M | |
| Standby power consumption | ||
| WATT | Network full load power consumption≤25W Full load power consumption ≤240W | |
| LED INDICATOR | PWR:Power LED SYS:System LED 1-24:10/100、1000M Network connection indicator 25-28:10G SFP connection indicator | |
| POWER INPUT | 2 sets of hot swappable redundant power supplies AC：100-240Vac 50-60Hz 0.5A 65W / 1sets Switch Full Load MAX 30W | |
| OPERATING TEMPERATURE/HUMIDITY | -30° C +75° C; 5%~95% RH | |
| INGRESS PROTECTION | IP30 | |
| LIGHTNING PROTECTION LEVEL | 6KV | |
| WEIGHT | 4.2kg/5.9kg | |
| DIMENSION | 440mm*345mm*45mm 515mm*403mm*95mm | |
| PORT SHUTDOWN | Support | |
| Port Speed | Support auto negotiate, full-1000, full-100, half-100, full-10, half-10 | |
| Flow Control | support full-duplex IEEE 802.3x, half-duplex back pressure | |
| Storm Control | Supports rate limit for broadcast, multicast, and DLF packets | |
| Storm Constrain | Support the detection of broadcast packets, multicast packets, or unicast packets on the port, shutdown the port if the rate is over the threshold. | |
| Port Mirror | Support | |
| Port Rate Limit | Support port ingress and egress rate limit | |
| Link Aggregation | Support manual link aggregation Support LACP dynamic link aggregation Supports up to 8 aggregation groups, each group up to 8 ports Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy | |
| Port Isolate | Support | |
| Jumbo Frame | Support port-based VLAN Up to 4096 VLANs Support Voice VLAN, can configure QoS for voice data 802.1Q VLAN | |
| Cable Distance Diag | Support | |
| Redundant Port | Support | |
| The DDM of fiber ports | Support | |
| MAC | 8K | |
| MAC Table Management | Support | |
| Forwarding mode | Support IVL forwarding mode | |
| Static MAC Address | Support | |
| MAC Address Binding | Support | |
| MAC Address Filtering | Support | |
| MAC Learning Control | Control the MAC learning based on port | |
| Number of VLANs | 4K | |
| 802.1q-based VLAN | Support | |
| MAC-based VLAN | Support | |
| IP-based VLAN | Support | |
| Protocol-based VLAN | Support | |
| PVLAN | Support | |
| VLAN Mapping | Support 1:1 mapping | |
| QinQ | Support basic QinQ Support flexible QinQ | |
| Spanning Tree Protocol | Support STP/RSTP/MSTP | |
| Port Loop Detection | Support | |
| EAPS | Support RFC3619 | |
| ERPS | Support G.8032/Y.1344 | |
| LLDP | Support LLDP & LLDP-MED | |
| UDLD | Fully compatible with CISCO's UDLD protocol | |
| ARP | Support static and dynamic ARP | |
| IP Route | Support 0.0.0.0/0 route and other static route, but can’t support L3 forwarding. | |
| VLAN Interface | Support 32 VLAN interfaces | |
| Static Multicast MAC Address | Support | |
| IGMP SNOOPING | Support | |
| MLD SNOOPING | Support | |
| MVR | Support | |
| GMRP | Support | |
| Standard IP-based ACL | Support | |
| Extended IP based ACL | Support |
